苏州东伟元电子有限公司

咨询电话:

13913158248

当前位置:

首页   >  产品中心  >  中国台湾仪鼎PICOTEST  >  PICOTEST测试讯号转换器  >  J2110APICOTEST仪鼎仪器专业测试讯号转换器

PICOTEST仪鼎仪器专业测试讯号转换器

简要描述:PICOTEST仪鼎仪器专业测试讯号转换器专业代理销售现货供应INJBOI,INJB02,INJB03,J2100A.J2101A,J2102A,J2110A,J2111A,J2112A,J2120A,J2130A,J2140A,J2160A,J2180A,J2180A-20,J2190A

  • 产品型号:J2110A
  • 厂商性质:代理商
  • 更新时间:2024-11-03
  • 访  问  量:2545

详细介绍

给我们留言

品牌PICOTEST/中国台湾仪鼎

PICOTEST仪鼎仪器专业测试讯号转换器

J2110A Solid State Voltage Injector 

 
 
 
 
 
iconDC~45MHz的頻寬可支援溫度及機械控制(loop band width< 1Hz)和zui高性能調節器及放大器量測
icon優異精確的低失真表現
icon25Ω串接插入電阻
icon50Ω 輸入阻抗(OSC port)
icon< 3uA偏壓電流
icon> 2 MΩ輸入電阻(IN port)
icon可配合通用輸入型的高PSRR 低噪音穩壓器(J2170A)使用
icon詳細規格
PICOTEST仪鼎仪器专业测试讯号转换器J2110A测试讯号转换器
 

While it is possible to obtain high quality injection transformers with bandwidths as wide as 1Hz to 5MHz or more, in some cases this is still insufficient for some tests. For example a typical heater control loop might have a bandwidth of less than 1Hz while some linear regulators and opamp circuits can have bandwidths of up to 100MHz or in some cases even higher. For these applications, a solid state injector can provide the necessary bandwidth. A solid state injector can perform at DC, while the upper frequency limit is dictated by the components selected and the printed circuit board material and layout. It is possible to obtain a solid state injector with a working range of DC – 200MHz, though above 50MHz the interconnection between the injector and the circuit being tested can become quite critical. It is essential that ripple from the injector power supply does not dramatically degrade the dynamic range or the signal to noise ratio of the measurement. The resulting plots are often much cleaner when using a solid state injector than with a transformer injector.

The selection of a valid injection point in the circuit is more critical when using a solid state injector than with the transformer injector. The solid state injector presents an infinite impedance between the points of injection. In order to provide correct results one side of the measurement must present a much higher impedance than the other side. In a typical power supply control loop, the voltage sense divider is generally a good injection point, since the output impedance of the power supply is very low compared with the impedance of the voltage sense divider.

The solid state injector has a limitation in the operating voltage, with the majority limited to 10V or 12V. This is not the amplitude of the injection signal, but the peak value (positive or negative) of the signal operating voltage.

PICOTEST仪鼎仪器专业测试讯号转换器
 
Specifications
CharacteristicRating
Maximum Vcc±12V
Maximum Icc20mA
Maximum Input Voltage DC+AC±10.5V
Maximum Output Voltage±10.5V
Offset Voltage3mV
Bias Current8uA
3dB Bandwidth (-10dBm)DC ~ 40MHz
Temperature range0 ~ 50°C
Maximum Altitude6000 Ft

J2100A 1 hz - 5 mhz
J2101A  10 hz - 45 mhz
J2110A
J2120A
J2130A

J2140A

J2160A

J2180A

J2180A

J2190A

 

产品咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
推荐产品
查看更多产品

24小时咨询热线

0512-66315386
联系人:周瑞东 邮箱:13913158248@163.com 地址:苏州吴中区沈东路89号奥星电子产业园 6栋513室

扫一扫,关注我们

版权所有©2024 苏州东伟元电子有限公司  备案号:苏ICP备13024284号-1

技术支持:化工仪器网  管理登陆  sitemap.xml

Baidu
map